Small Scale Railway Mini-Sound
unit in a G Scale Bachmann 2-6-0 Tender
If you want this configuration, please let us know, and we'll prepare it accordingly.
1) remove screws in each corner of tender shell corner to
separate shell from tender floor (photo not shown)
2) remove rear truck, drill 1/4 inch hole in coupler support bracket,
glue in larger sensor on a cable
3) paint axle 50% gloss white and 50% flat black
4) drill hole through floor for sensor cable, solder connect existing 8 Ohms speaker,
9V battery clips, connect existing volume control ON/OFF switch that came with the tender
